My in-laws had solar panels installed a few years ago (yes, I helped install it), and last summer they decided to add a 7-person hot tub to their beautiful newly built deck. Then the electricity bills arrived — and the solar system that used to eliminate their electricity bills was now covering only about two-thirds of their electricity use.
My immediate reaction was “Geez, how much electricity does that thing use?”
So I dug through their consumption data and found that their hot tub uses approximately 4,380 kWh per year, or roughly 12 kWh every day. That means the hot tub increased their household electricity consumption by approximately 73%. That got me thinking: how much energy is 12 kWh? And is that a lot?
Numbers like “4,380 kWh” don’t mean much on their own, so I’m going to compare it to two things everyone understands: a kettle, and me on a bike. My in-laws’ hot tub will be our control. Let me walk you through it!
Power (kW) vs Energy (kWh): Me on a Bike
Power and energy are related, but they are not the same thing. The easiest way to understand the difference is to imagine me riding a bike:
- Power (kW) is how hard something is working right now. On a bike, it’s how hard I’m pedalling.
- Energy (kWh) is power multiplied by time. On a bike, it’s how hard I’m pedalling and how long I can keep it up.
I can pedal very hard for one minute or moderately for an hour. The first effort involves more power, but the second may produce more total energy because I sustain it for much longer.
Appliances work the same way. A kettle uses a lot of power for a short time. A hot tub’s heater and pumps switch on and off throughout the day, so its energy use adds up over 24 hours.
The Kettle Example
Let’s begin with something familiar. A typical electric kettle has a power rating of approximately 2 kW. If it runs for five minutes, the calculation looks like this:
2 kW × 5/60 hours = 0.17 kWh
So, boiling one full kettle of water uses approximately 0.17 kWh of energy.
A kettle is very powerful, but it only runs for a few minutes. On average, my in-laws’ hot tub uses about 0.5 kWh every hour, a quarter of the kettle’s power, but it switches on multiple times a day. That’s where the energy adds up.
How Much Power Can I Generate on a Bike?
Before I start this section, let me preface by saying I am not a cyclist. I’m not great at it either. And I’m 5’2” so take that into consideration when judging my power output!
During a recent one-hour indoor cycling session, my Oura ring estimated that I burned 250 active calories.
However! The calories my body burns are not the same as the mechanical energy delivered through the pedals. Humans are not perfectly efficient machines. Only part of the energy (about one-quarter) we use becomes useful mechanical work, while most of it becomes heat. This explains why indoor cycling eventually turns you into a sweaty radiator.
For this comparison, I’m estimating that I can sustain approximately 100 watts of mechanical output while actively cycling. I am not sprinting, but I am definitely not going for a leisurely ride either. That means:
One Ana = 100 W = 0.1 kW
If I maintain that output for one hour, I produce:
0.1 kW × 1 hour = 0.1 kWh
Now we can begin making some ridiculous comparisons.
How Many Ana’s on Bikes Does It Take?
Here is what the kettle and hot tub look like when converted into human cycling power.
| Electrical load | Energy required | Cycling equivalent |
|---|---|---|
| Boil one kettle | 0.17 kWh | One Ana for about 1 hour 40 minutes, or 20 Ana’s riding for five minutes |
| Powering the hot tub for one hour | 0.5 kWh | 5 Ana’s riding for one hour |
| Powering the hot tub for one day | 12 kWh | One Ana riding for 120 hours, or 12 Ana’s riding for a 10-hour day |
Bonus: How Many Kettles Equal One Day of Hot-Tub Use?
Remember that one kettle boil uses approximately 0.17 kWh.
12 kWh ÷ 0.17 kWh ≈ 72 kettle boils
This means that one day of hot-tub use takes about as much electricity as boiling 72 full kettles of water. And unlike the kettle, the hot tub starts again tomorrow.
The Real Bill: My In-Laws’ Hot Tub
Here’s what the hot tub did to my in-laws’ annual electricity use:
- Before hot tub: 6,000 kWh per year
- After hot tub: 10,380 kWh per year
- Hot tub’s share: 4,380 kWh per year (+73%)
For context, in How Many Solar Panels Do You Need to Charge an EV in Alberta? we worked out that a typical EV driven 20,000 km a year uses about 4,000 kWh. My in-laws’ hot tub uses about as much electricity as charging an electric car.
Side note: If you already have solar, adding a hot tub can make a well-performing system look undersized — not because it is producing less, but because your home is using more electricity. We explain what is happening in Why Your Solar System May Not Be Offsetting Your Bill in Alberta.
So How Many Solar Panels Does a Hot Tub Need?
A modern 500 W solar panel in Alberta produces about 500 kWh per year. It could be 10–20% higher or lower depending on roof orientation, shading, and other site-specific factors, but 500 kWh is a good estimate.
4,380 kWh ÷ 500 kWh per panel ≈ 9 panels
So it takes about 9 × 500 W solar panels to offset a 7-person hot tub. And here’s my favourite comparison. Remember my very generous estimate of 100 W while pedalling?
100 W × 10 hours a day × 365 days = 365 kWh per year
Even if I pedalled 10 hours a day, every day, for a whole year, one solar panel would still out-produce me. And it wouldn’t even break a sweat.
Conclusion
A hot tub can be a surprisingly big electrical load. My in-laws’ 7-person tub uses about 12 kWh a day:
- Enough to boil a kettle 72 times
- Enough to keep 12 of me pedalling for a full 10-hour day
- About 9 solar panels’ worth of electricity every year
The key is remembering the difference between power and energy. Power is how hard something works; energy is how hard and how long. Your electricity bill is all about energy, and a hot tub that’s always on adds up fast. The good news? About 9 solar panels can cover it, and they won’t complain about sore legs.
Thinking About Adding a Hot Tub?
Tell us before we size your solar system! In Alberta, your solar system is designed around your current annual electricity use, so a hot tub you’re planning should be part of the design conversation from day one: roof space for extra panels, wire sizing, and the right inverter for future expansion (microinverters!).
Already have solar and just added a hot tub? We can help you work out how many panels it would take to catch up. Get in touch and we’ll happily walk you through the numbers.


